Colorado Springs Irrigation System Maintenance and Repair
We are available throughout Colorado Springs for your Lawn Sprinkler System needs:
Irrigation System Repair
We are available to repair your sprinkler system even if we have not previously been to your home. Our rates are very competitive and we are usually able to schedule a repair in a short amount of time. We also have rush service available if you have a repair that requires immediate attention. We can add or remove zones to your existing system. We can check your system for adequate coverage and proper functionality if you need this service. We regularly install automatic rain sensors which will shut off the system if there is adequate rainfall to do so. With the rising cost of water in Colorado Springs this is a place which will offer a quick return on the investment of repair.
Smart Water Application Technologies
- “Smart” irrigation controllers with Evapo-Transpiration (ET) sensor
- Stream rotor spray nozzles with matched precipitation
- Spray and rotor bodies with built in check valves
Irrigation System Installation
We install sprinkler systems from the ground up, and may surprise you with the value of our systems. We can offer a great price and still provide the highest quality system for you. Our attention to detail in this area is what makes our company different. Not all sprinkler or drip irrigation systems are the same. We will design a system for you which will be economical with your water in the long run, and will last for many years.
Irrigation System Winterization
Not every company in Colorado Springs uses the same equipment. There are many types of air compressors, we use a tow-behind compressor that has an air output of 200 CFM. The pressure is not excessive, but the amount of air is constant even with a large commercial system. We are prepared with every fitting necessary to connect to your system. When we arrive we turn off the system at the point of connection, open any system drains, connect the air compressor to the system and blow out all of the lines, and open any drains on the outside of the house. We also set all valves on the pressure vacuum breaker to the positions that they need to be in for the freezing weather.